Potenciómetro

Introducción

The pot and potV2 classes are used with Potentiometers, which are analog sensors that measure the angular position of a rotating shaft. A Potentiometer outputs a voltage proportional to its position.

Dependiendo de la versión del potenciómetro, la cantidad de rotación que puede detectar varía:

• Potenciómetro - Hasta 250 grados

• Potenciómetro V2 - 330 grados (continuo)

Potenciómetro	Potenciómetro V2

Potenciómetro

Class Constructors

pot(
  triport::port &port );

Class Destructor

Destroys the pot object and releases associated resources.

~pot();

Parameters

Parámetro	Tipo	Descripción
port	triport::port &	The 3-Wire Port the Potentiometer is connected to, written as Brain.ThreeWirePort.X or ExpanderName.X, where X is the port letter (for example, Brain.ThreeWirePort.A or Expander1.A).

Example

// Create a pot instance in Port A
pot PotentiometerA = pot(Brain.ThreeWirePort.A);

Potenciómetro V2

Class Constructors

potV2(
  triport::port &port );

Class Destructor

Destroys the potV2 object and releases associated resources.

~potV2();

Parameters

Parámetro	Tipo	Descripción
port	triport::port &	The 3-Wire Port the Potentiometer V2 is connected to, written as Brain.ThreeWirePort.X or ExpanderName.X, where X is the port letter (for example, Brain.ThreeWirePort.A or Expander1.A).

Examples

// Create a Potentiometer V2 on 3-Wire Port A
potV2 PotentiometerV2A = potV2(Brain.ThreeWirePort.A);

Funciones de los miembros

The pot and potV2 classes include the following member functions:

• angle — Returns the angular position of the Potentiometer in degrees or as a percent.

Before calling any pot or potV2 member functions, a pot or potV2 instance must be created, as shown below:

/* This constructor is required when using VS Code.
Potentiometer configuration is generated automatically
in VEXcode using the Device Menu. Replace the values
as needed. */

// Create a potV2 instance in Port A
potV2 PotentiometerV2A = potV2(Brain.ThreeWirePort.A);

angle

Devuelve la posición angular del potenciómetro.

1 — Esta función representa el ángulo como un porcentaje.

int32_t angle (
  percentUnits units = percentUnits::pct );

2 — Esta función representa el ángulo como las unidades de rotación elegidas.

double angle(
  rotationUnits units );

Parameters

Parámetro	Tipo	Descripción
units	percentUnits	The unit that represents the position as a percentage of full rotation: percent / pct (default) — percent, from 0 to 100%.
units	rotationUnits	The unit that represents the angle: deg / degrees — degrees, from 0 to 250 for a Potentiometer or 0 to 330 for a Potentiometer V2 turns / rev — revolutions

Return Values

Devoluciones:

• An int32_t when using percentUnits.

• A double when using rotationUnits.

Examples

// Get the current angle of the Potentiometer V2 in the
// range 0 to 330 degrees.
double angle = PotentiometerV2A.angle(degrees);

// Print the current angle of the Potentiometer to the
// brain screen.
Brain.Screen.print(angle);