Salida PWM

Introducción

The pwm_out class is used to control PWM (Pulse Width Modulation) output on a VEX V5 3-Wire port. It allows devices to send variable-width pulse signals to compatible 3-Wire components.

Constructores de clases

pwm_out( 
  triport::port &port );

Instructor de clase

Destroys the pwm_out object and releases associated resources.

~pwm_out();

Parámetros

Parámetro	Tipo	Descripción
port	triport::port &	The 3-Wire Port the PWM output is connected to, written as Brain.ThreeWirePort.X or ExpanderName.X, where X is the port letter (for example, Brain.ThreeWirePort.A or Expander1.A).

Ejemplo

// Create the pwm_out instance on 3-Wire Port A
pwm_out pwm = pwm_out(Brain.ThreeWirePort.A);

Funciones de los miembros

The pwm_out class includes the following member functions:

• state — Sets the state of the PWM output.

Before calling any pwm_out member functions, a pwm_out instance must be created, as shown below:

/* This constructor is required when using VS Code.
PWM configuration is generated automatically
in VEXcode using the Device Menu. Replace the values
as needed. */

// Create the pwm_out instance on 3-Wire Port A
pwm_out pwm = pwm_out(Brain.ThreeWirePort.A);

state

Establece el estado de la salida PWM a un valor específico.

Available Functions

void state(
 int32_t      value,
 percentUnits units );

Parameters

Parámetro	Tipo	Descripción
value	int32_t	El nuevo valor a configurar para la salida PWM, de -100 a +100 por ciento.
units	percentUnits	The unit used to represent the PWM value: percent / pct — percent

Return Values

Esta función no devuelve ningún valor.

Notes

• El valor de salida PWM oscila entre -100 y +100 por ciento.

• The only valid unit for PWM output is percent.

Examples

// Set the PWM Output to 50%
pwm.state(50, percent);

// Set the PWM Output to -75%
pwm.state(-75, percent);