Motor 393

Introducción

El Motor 393 es un motor de CC controlado mediante un controlador de motor VEX 29 (MC29). El MC29 convierte la señal de modulación por ancho de pulso (PWM) de un puerto Brain de 3 hilos en un voltaje variable que acciona el Motor 393.

This page uses motor_393 as the example Motor 393 name. Replace it with your own configured name as needed.

A continuación se muestra una lista de los métodos disponibles:

• spin – Spins a Motor 393 forward or reverse until stopped.

• set_velocity – Tells a Motor 393 how fast to spin.

• stop – Stops a Motor 393 immediately.

• set_reversed – Sets a Motor 393 to have its direction be reversed.

Constructor – Inicializar manualmente un controlador de motor 29.

• Motor29 – Creates a Motor Controller 29.

girar

spin rotates a connected Motor 393 in a specified direction using the current motor velocity.

Usage:
motor_393.spin(direction, velocity, units)

Parámetros	Descripción
direction	The direction in which to spin the Motor 393: FORWARD – By default, this is counterclockwise REVERSE – By default, this is clockwise
velocity	Optional. The velocity to spin with from 0% to 100% when using PERCENT. This can be an integer or decimal (float). If the velocity is not specified or previously set, the default velocity is 50%.
units	Optional. The velocity unit: PERCENT RPM (default) – Rotations per minute VelocityUnits.DPS – Degrees per second

establecer_velocidad

set_velocity tells a Motor 393 how fast to spin. A higher percentage makes the Motor 393 spin faster and a lower percentage makes the Motor 393 spin slower.

Every project begins with each Motor 393 spinning at 50% velocity by default.

Usage:
motor_393.set_velocity(value, units)

Parámetro	Descripción
velocity	The velocity to spin with from 0% to 100% when using PERCENT. This can be an integer or decimal (float).
units	Optional. The velocity unit: PERCENT RPM (default) – Rotations per minute VelocityUnits.DPS – Degrees per second

detener

stop stops the connected Motor 393 immediately.

Usage:
motor_393.stop()

Parámetros	Descripción
	Este método no tiene parámetros.

set_reversed

set_reversed sets the Motor 393 to be reversed so that the FORWARD direction will spin clockwise. This method works the same as setting the reverse parameter to True when constructing a Motor29.

Usage:
motor_393.set_reversed(value)

Parámetros	Descripción
value	Whether the Motor 393’s direction is reversed: True — Reverses the Motor 393’s direction. False — Returns the Motor 393’s direction to its default.

Constructores

Constructors are used to manually create Motor29 objects, which are necessary for configuring a Motor Controller 29/Motor 393 outside of VEXcode.

Motor29

Motor29 creates a Motor Controller 29.

Usage:
Motor29(port, reverse)

Parámetro	Descripción
port	The 3-Wire Port that the motor is connected to: On the EXP Brain – Ports.PORTx where x is the number of the port. On a 3-Wire Expander – expander.a where expander is the name of the expander instance.
reverse	Optional. Sets whether the Motor 393’s spin should be reversed. True – FORWARD will spin clockwise False (default) – FORWARD will spin counterclockwise

# Create a Motor Controller 29 in Port A
motor_393 = Motor29(brain.three_wire_port.a)